Movimento Centrale Wheels Manufacturing Inc. PF30A Cannondale Shimano
Movimento Centrale Wheels Manufacturing Inc. PF30A Cannondale Shimano
Prezzo consigliato 181,48
131,06
50,42 di sconto
In magazzino
(ancora 1)
- Consegna 2-4 giorni lavorativi
- Consegna monitorata gratuita
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Invia un'e-mail al servizio clientiPro e Contro
Pro e Contro
- The tread makes sure the bearings stay firmly in the frame.
- The aluminium bottom bracket will last a long time.
- The bearings are well sealed and turn smoothly.
- If the bearings are worn out, you can replace them fairly easily yourself.
- This bottom bracket is heavier than a plastic bottom bracket.
Caratteristiche tecniche
Caratteristiche tecniche
Marca
|
Wheels Manufacturing Inc. |
Adatta a
|
da corsa / MTB |
Shimano Hollowtech II (24 mm) | |
Larghezza movimento centrale
|
73 mm Asimmetrico (Cannondale) |
Diametro movimento centrale
|
46 mm |
Diametro esterno cuscinetti movimento centrale
|
44 mm |
Colore
|
Nero |
Filettatura
|
No |
Tipo di Movimento Centrale
|
Pressfit 30A |
Descrizione
Descrizione
The Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket is made of two durable aluminum cups that must be screwed together inside the frame. This ensures that these bottom bracket bearings stay firmly in the frame for long life. Plus, this makes these bearings very easy to maintain!
Suitable for Cannondale
Cannondale is the only manufacturer to use the Pressfit 30a fit. Wheels Manufacturing Inc. has therefore made this bottom bracket especially for Cannondale bikes. Not all Cannondale models use the Pressfit 30a fit. So pay close attention to that and measure your bottom-bracket if in doubt.
Durable and replaceable bearings
This Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket uses Enduro Abec-3 bearings. These are smooth-running bearings with excellent sealing. So your crank will spin extra long and smoothly thanks to these bearings. And should the bearings ever wear out, you can replace them quite easily yourself.
Color: Black
Bottom Bracket/Frame Interface: Cannondale PF30A
Bottom Bracket Shell Width: 73mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 91mm in 73mm wide shell*
Crank Spindle Diameter: 24.00mm
Tool Pattern: 44mm x 16 notch
Weight: 158g
• 24mm cranksets
Mostra di più
Mostra di meno
Suitable for Cannondale
Cannondale is the only manufacturer to use the Pressfit 30a fit. Wheels Manufacturing Inc. has therefore made this bottom bracket especially for Cannondale bikes. Not all Cannondale models use the Pressfit 30a fit. So pay close attention to that and measure your bottom-bracket if in doubt.
Durable and replaceable bearings
This Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket uses Enduro Abec-3 bearings. These are smooth-running bearings with excellent sealing. So your crank will spin extra long and smoothly thanks to these bearings. And should the bearings ever wear out, you can replace them quite easily yourself.
Tecnologie
Bearings: Enduro ABEC-3Color: Black
Bottom Bracket/Frame Interface: Cannondale PF30A
Bottom Bracket Shell Width: 73mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 91mm in 73mm wide shell*
Crank Spindle Diameter: 24.00mm
Tool Pattern: 44mm x 16 notch
Weight: 158g
Compatibilità
• Cannondale PF30A frames• 24mm cranksets
Scopri di piu' sul nostro blog
Sostituire il movimento centrale - Bottom brackets [How-To]
Per saperne di piùConsigliato dagli specialisti del prodotto
Consigliato dagli specialisti del prodotto
Tutte le caratteristiche tecniche
Generale
Marca
Wheels Manufacturing Inc.
Adatta a
da corsa / MTB
Larghezza movimento centrale
73 mm Asimmetrico (Cannondale)
Diametro movimento centrale
46 mm
Diametro esterno cuscinetti movimento centrale
44 mm
Colore
Nero
Filettatura
No
Tipo di Movimento Centrale
Pressfit 30A
Materiale del telaio
Carbonio